Firewall Aspf - HPE FlexNetwork HSR6800 Security Command Reference

Default command level
1: Monitor level
Parameters
application-name: Name of the application to be used for port mapping. Available applications
include FTP, H323, HTTP, HTTPS, IKE, RTSP, SMTP, SSH, and VAM.
port port-number: Specifies to display port mapping information on the specified port. The port
number is in the range of 0 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all the information about port mapping.
<Sysname> display port-mapping
SERVICE
-------------------------------------------------
ftp
h323
http
rtsp
smtp
ike
https
vam
ssh
Table 59 Command output
Field
SERVICE
PORT
ACL
TYPE
Related commands
port-mapping

firewall aspf

Use firewall aspf to apply the specified ASPF policy to the specified direction of the current
interface.
Use undo firewall aspf to remove the specified ASPF policy on the current interface.
PORT ACL
21
1720
80
554
25
500
443
18000
22
TYPE
system defined
system defined
system defined
system defined
system defined
system defined
system defined
system defined
system defined
Description
Application layer protocol that is mapped to a port.
Number of the port for the application layer protocol.
Number of the ACL specifying the host range.
Port mapping type, system predefined or user customized.
372