Session Max-Entries; Session Persist Acl - HPE FlexNetwork HSR6800 Security Command Reference

session max-entries

Use session max-entries to set the maximum number of sessions.
Use undo session max-entries to cancel the upper limit.
Syntax
In standalone mode:
session max-entries max-entries slot slot-number
undo session max-entries [ max-entries ] slot slot-number
In IRF mode:
session max-entries max-entries chassis chassis-number slot slot-number
undo session max-entries [ max-entries ] chassis chassis-number slot slot-number
Default
The maximum number of sessions depends on the device model.
Views
System view
Default command level
2: System level
Parameters
max-entries: Specifies the maximum number of sessions. The value range is 1 to 10000000.
slot slot-number: Specifies a card by its slot number. The slot-number argument represents the
number of the slot where the card resides. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The
chassis-number argument specifies the ID of the IRF member device. The slot-number argument
specifies the number of the slot that holds the card. (In IRF mode)
Usage guidelines
For distributed devices, you can set the maximum number of sessions based on slots.
The maximum number should not exceed the session count specification of a device or a card.
Examples
# Set the maximum number of sessions to 100000.
<Sysname> system
[Sysname] session max-entries 100000

session persist acl

Use session persist acl to specify the persistent session rule. All sessions permitted by the
specified ACL are considered persistent sessions.
Use undo session persist to remove the configuration.
Syntax
session persist acl acl-number [ aging-time [ seconds ] time-value ]
undo session persist
393