Portal Server Method - HPE FlexNetwork HSR6800 Security Command Reference

Examples
# Configure portal server pts, setting the IP address to 192.168.0.111, the key to portal in plain text,
and the redirection URL to http://192.168.0.113/portal.
<Sysname> system-view
[Sysname] portal server pts ip 192.168.0.111 key simple portal url
http://192.168.0.113/portal
Related commands
•
display portal server
•
portal device-id

portal server method

Use portal server method to enable Layer 3 portal authentication on an interface, and specify the
portal server and the authentication mode to be used.
Use undo portal to disable Layer 3 portal authentication on an interface.
Syntax
portal server server-name method { direct | layer3 | redhcp }
undo portal
Default
Layer 3 portal authentication is disabled on an interface.
Views
Interface view
Default command level
2: System level
Parameters
server-name: Name of a portal server, a case-sensitive string of 1 to 32 characters.
method: Specifies the authentication mode to be used.
direct: Direct authentication.
layer3: Cross-subnet authentication.
redhcp: Re-DHCP authentication.
Usage guidelines
The specified portal server must exist.
Examples
# Enable Layer 3 portal authentication on interface GigabitEthernet 3/0/1, referencing portal server
pts and setting the authentication mode to direct.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] portal server pts method direct
Related commands
display portal server
166