Display Session Aging-Time - HPE FlexNetwork HSR6800 Security Command Reference

Syntax
display application aging-time [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
You can use this command to display the default session aging timers for the application layer
protocols before these session aging timers are adjusted.
Examples
# Display the current session aging timers for the application layer protocols.
<Sysname> display application aging-time
Protocol
ftp
dns
sip
msn
qq
Table 60 Command output
Field
Protocol
Aging-time(s)
Related commands
application aging-time

display session aging-time

Use display session aging-time to display the session aging timers in different protocol states.
Syntax
display session aging-time [ | { begin | exclude | include } regular-expression ]
Views
Any view
Aging-time(s)
3600
60
300
3600
60
Description
Application layer protocol.
Session aging timer in seconds.
378