Domain; Domain Default Enable - HPE FlexNetwork HSR6800 Security Command Reference

•
state

domain

Use domain to create an ISP domain and enter ISP domain view.
Use undo domain to remove an ISP domain.
Syntax
domain isp-name
undo domain isp-name
Default
There is a system predefined ISP domain named system in the system.
Views
System view
Default command level
3: Manage level
Parameters
isp-name: Specifies an ISP domain name, a case-insensitive string of 1 to 24 characters that cannot
contain the slash (/), backslash (\), colon (:), asterisk (*), question mark (?), left angle bracket (<),
right angle bracket (>), quotation marks ("), vertical bar (|), and at sign (@).
Usage guidelines
All ISP domains are in active state when they are created.
The system predefined ISP domain system cannot be deleted, but you can modify its configuration.
To delete the ISP domain that is used as the default ISP domain, you must first change it to a
non-default ISP domain by using the undo domain default enable command.
Examples
# Create ISP domain test, and enter ISP domain view.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test]
Related commands
•
state
•
display domain

domain default enable

Use domain default enable to specify the default ISP domain. Users without any domain name
carried in the usernames are considered to be in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
29