Certificate Request Url - HPE FlexNetwork HSR6800 Security Command Reference

Default
The polling is executed every 20 minutes for up to 50 times.
Views
PKI domain view
Default command level
2: System level
Parameters
count count: Specifies the maximum number of attempts to poll the status of the certificate request.
The value range is 1 to 100.
interval minutes: Specifies the polling interval in minutes. The value range is 5 to 168.
Usage guidelines
After an applicant makes a certificate request, the CA might need a long period of time if it verifies the
certificate request manually. During this period, the applicant needs to query the status of the request
periodically to get the certificate as soon as possible after the certificate is signed.
Examples
# Specify the polling interval as 15 minutes and the maximum number of attempts as 40.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request polling interval 15
[Sysname-pki-domain-1] certificate request polling count 40
Related commands
display pki certificate

certificate request url

Use certificate request url to specify the URL of the server for certificate request through SCEP.
Use undo certificate request url to remove the configuration.
Syntax
certificate request url url-string
undo certificate request url
Default
No URL is specified for a PKI domain.
Views
PKI domain view
Default command level
2: System level
Parameters
url-string: Specifies the server URL for certificate request, a case-insensitive string of 1 to 127
characters. It comprises the location of the server and the location of CGI command interface script
in the format of http://server_location/ca_script_location, where server_location must be an IP
address and does not support domain name resolution.
231