Portal Nas-Port-Type - HPE FlexNetwork HSR6800 Security Command Reference

Syntax
portal nas-port-id nas-port-id-value
undo portal nas-port-id
Default
No NAS-Port-ID value is specified for an interface, and the device uses the information obtained
from the physical interface where the portal user accesses as the NAS-Port-ID value in a RADIUS
request.
Views
Interface view
Default command level
2: System level
Parameters
nas-port-id-value: NAS-Port-ID value, a case-sensitive string of 1 to 253 characters. This value is
used as the value of the NAS-Port-ID attribute in the RADIUS request to be sent to the RADIUS
server when a portal user logs on from an interface.
Usage guidelines
If the device uses a RADIUS server for authentication, authorization, and accounting of portal users,
when a portal user logs on from an interface, the device sends a RADIUS request that carries the
NAS-Port-ID attribute to the RADIUS server.
Examples
# Specify the NAS-Port-ID value of GigabitEthernet 3/0/1 as ap1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] portal nas-port-id ap1

portal nas-port-type

Use portal nas-port-type to specify the access port type (indicated by the NAS-Port-Type value) on
the current interface. The specified NAS-Port-Type value is carried in the RADIUS requests sent
from the device to the RADIUS server.
Use undo portal nas-port-type to restore the default.
Syntax
portal nas-port-type { ethernet | wireless }
undo portal nas-port-type
Default
The access port type of an interface is not specified, and the NAS-Port-Type value carried in
RADIUS requests is the user access port type obtained by the access device.
Views
Interface view
Default command level
2: System level
Parameters
ethernet: Specifies the access port type as Ethernet, which corresponds to code 15.
163