HPE FlexNetwork HSR6800 Security Command Reference page 146

The max allowed user number is 2048 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Silent Mac User info:
MAC Addr
GigabitEthernet3/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 0, failed: 0
Max number of on-line users is 1024
Current online user number is 0
MAC Addr Authenticate state
...
Table 11 Command output
Field
MAC address authentication is
enabled
User name format is MAC address
in lowercase, like xxxxxxxxxxxx
Fixed username:
Fixed password:
Offline detect period
Quiet period
Server response timeout value
the max allowed user number
Current user number amounts to
Current domain: not configured,
use default domain
Silent Mac User info
GigabitEthernet3/0/1 is link-up
MAC address authentication is
enabled
From Port
Description
Whether MAC authentication is enabled.
Type of user account: MAC-based or shared.
•
If MAC-based accounts are used, this field displays "User name
format is MAC address..." and the format settings for usernames
and passwords. For example, MAC addresses without hyphens in
lower case.
•
If a shared account is used, this field displays "User name format
is fixed account."
Username of the shared account for MAC authentication users. If
MAC-based accounts are used, this field displays mac.
Password of the shared account for MAC authentication users.
•
If MAC-based accounts are used or if a shared account is used
but no password is configured, this field displays not configured.
•
If a shared account is used and a password is configured, this
field displays ******.
Setting of the offline detect timer.
Setting of the quiet timer.
Setting of the server timeout timer.
Maximum number of users each slot supports.
Number of online users.
Authentication domain in use.
Information about silent MAC addresses. A MAC address is marked
silent when it fails a MAC authentication, and at the same time, a quiet
timer starts. Before the timer expires, the device drops any packet from
the MAC address and does not perform MAC authentication for the
MAC address.
Status of the link on port GigabitEthernet 3/0/1. In this example, the
link is up.
Whether MAC authentication is enabled on port GigabitEthernet 3/0/1.
133
Port Index
AuthIndex