HPE FlexNetwork HSR6600 Installation Manual
Hide thumbs
Also See for FlexNetwork HSR6600:
- Security configuration manual (655 pages) ,
- Configuration manual (605 pages) ,
- High availability command reference (207 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Configuration Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HPE FlexNetwork HSR6600
Summary of Contents for HPE FlexNetwork HSR6600
-
Page 1: Installation Guide
HPE FlexNetwork HSR6600 Routers Installation Guide Part number: 5200-3489 Document version: 6W106-20170412... - Page 2 © Copyright 2015, 2017 Hewlett Packard Enterprise Development LP The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Table Of Contents
Contents Preparing for installation ···································································· 1 Safety recommendations ············································································································· 1 Safety symbols ··················································································································· 1 General safety recommendations ··························································································· 1 Electricity ··························································································································· 1 Laser safety ······················································································································· 1 Router moving ···················································································································· 2 Examining the installation site ······································································································· 2 Weight support ··················································································································· 2 Temperature and humidity ·····································································································... - Page 4 Powering on the router ······································································································· 29 Logging in to the router through Telnet/SSH ·················································································· 29 Logging in to the router through the AUX port ················································································ 29 Displaying the initial configuration ································································································ 30 Configuring basic settings ·········································································································· 31 Replacement procedures ································································· 32 Safety recommendations ···········································································································...
- Page 5 Password loss ························································································································· 55 Examining the state of password recovery capability ································································· 55 Dealing with console login password loss when password recovery capability is enabled ·················· 56 Dealing with user privilege level password loss when password recovery capability is enabled ·········· 57 Dealing with password loss when password recovery capability is disabled ···································...
- Page 6 Appendix D Arranging slots and numbering interfaces ···························· 88 Slot arrangement ····················································································································· 88 Available slots for FIP-10/FIP-20 ································································································· 88 Numbering interfaces ················································································································ 88 Example ································································································································ 89 Index ··························································································· 90...
-
Page 7: Preparing For Installation
Always verify that the power has been disconnected. Laser safety The HPE HSR6600 routers are Class 1 laser devices. WARNING! • Do not stare into any fiber port when the router has power. The laser light emitted from the optical fiber may hurt your eyes. -
Page 8: Router Moving
Router moving When you move an HSR6600 router, follow these guidelines: • Move and unpack the router carefully to avoid router damage. • Use a safety hand truck when you move a heavy device or multiple devices. • Before you move the router, remove all the cables, USB devices, mounting brackets, and cable management brackets. -
Page 9: Altitude
Altitude Table 3 Altitude requirements Item Altitude Operating altitude –60 m (–196.85 ft) to 4 km (2.49 miles) Storage altitude –60 m (–196.85 ft) to 4.5 km(2.8 miles) Cleanliness Dust buildup on the chassis might result in electrostatic adsorption, which causes poor contact of metal components and contact points, especially when indoor relative humidity is low. -
Page 10: Esd Prevention
Figure 1 Airflow (HSR6602-G/HSR6602-G TAA) • Make sure there is enough space (greater than 10 cm (3.94 in)) around the air intake and outlet vents on the router for good ventilation. • Make sure the installation site has a good cooling system. ESD prevention CAUTION: •... -
Page 11: Emi
Figure 2 Attaching an ESD wrist strap (1) ESD wrist strap (2) Lock (3) Alligator clip All electromagnetic interference (EMI) sources, from outside or inside of the router and application system, adversely affect the router in the following ways: • A conduction pattern of capacitance coupling. -
Page 12: Power Supply
• For heat dissipation, make sure the headroom in the equipment room is no less than 3 m (9.84 ft). • Make sure the rack has enough space to accommodate the router. See Table 6 for rack requirements. For more information about chassis dimensions, see "Appendix A Chassis views and technical specifications."... -
Page 13: Accessories
Accessories Front mounting 3 m (9.84 ft) Console cable Rear mounting bracket and cable Load-bearing grounding cable (supplied with bracket (supplied management screw (supplied (supplied with router) with router) bracket (supplied with router) router) with router) Rubber feet M6 screw Cage nuts ESD wrist strap Cable tie... -
Page 14: Installing The Router
Installing the router NOTE: The fan tray, power supplies, FIPs, and interface modules are hot swappable. Installation flow Figure 3 HSR6600 installation flow Check before installation Follow these guidelines to prepare for installing an HSR6600 router: • Make sure you have read “Preparing for installation”... -
Page 15: Unpacking The Router
IMPORTANT: To mount multiple devices in the rack, place the heaviest one at the bottom of the rack. Unpacking the router Unpack the router as shown in Figure Figure 4 Unpacking the router Installing the router in a 19-inch rack Before you install the router to a rack, wear an ESD wrist strap. - Page 16 Figure 6 Installing cage nuts Install the cable management brackets. See Figure Figure 7 Installing the front mounting brackets and load-bearing screws Install the router to the rack. CAUTION: This task requires at least two people.
-
Page 17: Grounding The Router
Figure 8 Installing the router to the rack Move the router to an appropriate location in Attach the front mounting brackets to the the rack front rack posts Move the rear mounting brackets upwards Attach the rear mounting brackets to the rear along the rack posts until they make close rack posts contact with the load-bearing screws... -
Page 18: Connecting The Grounding Cable
Figure 9 Installing the ring terminal Connecting the grounding cable Remove the grounding screw from the rear panel of the router chassis. Attach the grounding screw to the ring terminal of the grounding cable. Use a screwdriver to fasten the grounding screw into the grounding screw hole. Attach the ring terminal on the other end of the grounding cable to the grounding strip. -
Page 19: Installing A Power Supply
Installing a power supply CAUTION: Do not install AC and DC power supplies on the same router. Before you install a power supply, make sure the power switch is off and the router is reliably grounded. The procedures for installing an AC power supply and a DC power supply are the same. The following uses an AC power supply as an example. -
Page 20: Installing A Him
Figure 11 Installing a FIP module NOTE: • For more information about the FIP LEDs, see “Appendix B LEDs.” • Do not insert or remove a HIM/MIM into or from a FIP module when the RUN LED on the FIP is flashing fast. -
Page 21: Installing A Mim
Installing a MIM NOTE: Install the MIM in the lower slot on the FIP module. To install a MIM: Locate the slot to install the MIM on the FIP module. Loosen the captive screws on a filler panel with a Phillips screwdriver, and then use a flat-blade screwdriver to prize the filler panel to remove it from the router. -
Page 22: Connecting The Power Cord
Figure 15 Insert the CF card Close the CF card cover and make sure the spring clip is fully locked into the slot. Figure 16 Close the CF card cover Connecting the power cord Connecting an AC power cord Make sure the router is reliably grounded, and the power switch on the router is in the OFF position. -
Page 23: Connecting A Dc Power Cord
Figure 17 Connecting an AC power cord to the router Connecting a DC power cord Correctly orient the plug at one end of the cable with the power receptacle on the power supply, and insert the plug into the power receptacle. The power receptacle is foolproof. - Page 24 Connect the two wires at the other end of the power cord to a DC power source.
-
Page 25: Connecting The Router To The Network
Connecting the router to the network Connecting the AUX cable Overview An AUX console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for connecting to the AUX port of the router, and DB-25 and DB-9 male connectors at the other end for connecting to the serial port of the modem. -
Page 26: Connecting An Ethernet Cable
Connecting an Ethernet cable Overview 10/100 Mbps Ethernet uses category-5 twisted pair cables, while 1000 Mbps Ethernet uses category-5 enhanced or category-6 twisted pair cables. Twisted pair cables include straight-through cables and crossover cables. Category-5 cables provide a transmission frequency of 100 MHz for voice and data transmission; they are mainly used in 100Base-T and 10Base-T networks. -
Page 27: Making An Ethernet Cable
Table 8 Straight-through cable pinouts Pinout No. Orange/white Orange/white Orange Orange Green/white Green/white Blue Blue Blue/white Blue/white Green Green Brown/white Brown/white Brown Brown Table 9 Crossover cable pinouts Pinout No. Orange/white Green/white Orange Green Green/white Orange/white Blue Blue Blue/white Blue/white Green Orange Brown/white... -
Page 28: Connecting A Fiber Cable
The 10/100/1000Base-T copper ports of the router support MDI/MDI-X auto-sensing. They are connected to the network through category-5 or above twisted pairs that are equipped with RJ-45 connectors. Check the status LED of the Ethernet ports. For more information about the LED status, see “Appendix B LEDs.”... -
Page 29: Fiber Cable Overview
Figure 25 SFP+ transceiver module Fiber cable overview You can use an optical fiber to connect a fiber Ethernet port or 10 Gbps Ethernet port. In addition, an optical fiber can connect fiber ports on interface modules. Optical fibers feature low loss and long transmission distance. Optical fibers can be classified into single mode fibers and multi-mode fibers. -
Page 30: Connecting A Fiber Cable
NOTE: • The HSR6600 supports LC fiber cables only. • Some cards of the HSR6600 router provide shielded covers for the fiber ports (such as SFP ports). Before using such fiber ports, remove the shielded covers. Keep the shielded covers properly. -
Page 31: Logging In To The Router And Configuring Basic Settings
Figure 27 Connecting a fiber cable Logging in to the router and configuring basic settings Login methods The following login methods are available for you to log in to the router: • Logging in through the console port, which is the most common way to log in to a router and also the prerequisite for configuring other login methods. -
Page 32: Setting Terminal Parameters
Select a configuration terminal. Plug the DB-9 female connector to the serial port of the configuration terminal and connect the RJ-45 connector to the console port of the router. Figure 28 Connecting the console cable Setting terminal parameters To set terminal parameters, for example, on a Windows XP HyperTerminal: Select Start >... - Page 33 Figure 30 Setting the serial port used by the HyperTerminal connection Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None, and click OK. Figure 31 Setting the serial port parameters Select File >...
- Page 34 Figure 32 HyperTerminal window On the Settings tab, set the emulation to VT100 and click OK. Figure 33 Setting terminal emulation in aaa Properties dialog box...
-
Page 35: Verification Before Power-On
Booting Normal Extend BootWare..---- More ---- Press Enter at the prompt and the prompt <HPE> appears. You can now configure the router. Logging in to the router through Telnet/SSH Log in to the router through the console port. Enable the Telnet or SSH function by using the telnet server enable or ssh server enable command and set user privileges by using the user privilege level command. -
Page 36: Displaying The Initial Configuration
Connect the AUX port to the configuration terminal by using the console cable. Then you can log in to the router through the AUX port. NOTE: For more information about how to log in to the router through the AUX port, see HPE FlexNetwork HSR6600 Routers Fundamentals Configuration Guide. Displaying the initial configuration After you log in to the router for the first time, use the display current-configuration command to display the initial configuration of the router. -
Page 37: Configuring Basic Settings
Configuring basic settings To configure basic settings for the router: Step Command Remarks Optional Set the current time and date clock datetime time date Available in user view Enter system view Available in user view system-view interface interface-type Enter Ethernet interface view interface-number Specify an IP address for the By default, no IP address is... -
Page 38: Replacement Procedures
Replacement procedures Safety recommendations Always wear an ESD wrist strap or ESD gloves when replacing the modules. When operating a pluggable module, such as a FIP module, memory module, CF card, or HIM/MIM, follow these guidelines: Ensure good alignment with the slot to avoid damage to the module during installation or removal. -
Page 39: Replacing A Him
To replace a FIP module, for example, FIP-20: Determine the FIP module to be removed. This section takes the FIP module in slot 3 as an example. Use a Philips screwdriver to loosen the captive screws of the FIP module to be removed until all spring pressure is released. -
Page 40: Replacing A Mim
Figure 36 Pulling the HIM out of the slot If you do not install a new HIM in the slot, install a blank panel. To install a new HIM, see “Installing a HIM.” Replacing a MIM NOTE: To replace a MIM module when the router is running, perform the remove slot slot-number command and then unplug the module. -
Page 41: Replacing A Transceiver Module
Press the ejector button next to the CF card. The ejector button moves outward so that it projects from the panel. Figure 38 Press the ejector button Press the ejector button again. This ejects the CF card partially out of its slot. Pull the CF card out of its slot. -
Page 42: Replacing A Fan Tray
Remove the optical fibers from the transceiver module. Pivot the clasp down to the horizontal position. Holding the handle of the transceiver module, gently pull the transceiver module out. Figure Insert the plastic plug to the removed transceiver module, and put the transceiver module into its original shipping materials. -
Page 43: Replacing A Memory Module
Figure 42 Pulling out the fan tray To install a new fan tray, grasp the handle of the fan tray with one hand and support the fan tray bottom with the other, and slide the fan tray along the guide rails into the slot until the fan tray seats in the slot and has a firm contact with the backplane. -
Page 44: When To Replace A Memory Module
Figure 44 Memory module slot (1) Release latch (2) Memory module slot When to replace a memory module Memory modules are removable components of the router. You need to replace a memory module in the following situations: • More memory is needed to upgrade the application program. •... - Page 45 Figure 45 Opening the chassis cover Replacing a memory module CAUTION: Align the polarization notch of the memory module with the key in the connector when you insert a memory module. Figure 46 Replacing a memory module...
-
Page 46: Hardware Management And Maintenance
<Sysname> display version HPE Comware Software, Version 7.1.064, Release 7607 Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP HPE HSR6602-XG uptime is 0 weeks, 0 days, 15 hours, 43 minutes Last reboot reason : Power on Boot image: flash:/HSR6602-CMW710-BOOT-R7607.bin Boot image version: 7.1.064, Release 7607 Compiled Dec 09 2016 16:00:01 System image: flash:/HSR6602-CMW710-SYSTEM-R7607.bin... -
Page 47: Displaying The Operational Statistics Of The Router
[SUBSLOT 1] RT-HIM-16GBP (Hardware)Ver.A, (Driver)1.0, (Cpld)133.0 [SUBSLOT 2] 8GBE (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0 …Omitted… Displaying the operational statistics of the router When you perform routine maintenance or the system fails, you may need to view the operational information of each functional module for locating failures. Generally, you need to run display commands one by one. -
Page 48: Displaying The Electrical Label Information Of A Module
Slot 0 : HSR6602-XG SubSlot No. Card Type Status Max Ports -------------------------------------------------------- Fixed SubCard Normal Table 12 Output description Field Description Slot 0 Interface module model SubSlot No. Slot number of the interface module Card Type Module model. The value NONE indicates that no module is present in the slot. Running status of the module: •... -
Page 49: Displaying The Cpu Usage Of A Module
Displaying the CPU usage of a module Use the display cpu-usage command to display the CPU usage of the module in each slot. <Sysname> display cpu-usage Slot 0 CPU usage: 1% in last 5 seconds 1% in last 1 minute 1% in last 5 minutes Table 14 Output description Field... -
Page 50: Displaying The Operational Status Of The Built-In Fan
Table 16 Output description Field Description Slot No Slot number of the CF card Device number of the CF card: • Dev No. 0 for a built-in CF card • 1 for an external CF card Operational status of the CF card: •... -
Page 51: Displaying The Alarming Thresholds Of A Module
Displaying the alarming thresholds of a module When the router is operating, too high a temperature and too low a temperature of a module affect the normal operation of the router. When the temperature of a module exceeds 53°C (127.4°F) or drops below –10°C (14°F), the system sends traps to prompt you to solve the problem. -
Page 52: Configuring A Combo Interface
0 crc, 0 align errors, 0 overruns 0 dribbles, 0 drops Output:0 packets, 0 bytes 0 broadcasts, 0 multicasts, 0 pauses 0 errors, 0 underruns, 0 collisions 0 deferred, 0 lost carriers • If the output includes “Media type is twisted pair, loopback not set, promiscuous mode not set”, it means that the interface is an RJ-45 Ethernet port. -
Page 53: Displaying Transceiver Module Information And Alarming Information
Displaying transceiver module information and alarming information Introduction to transceiver modules Table 19 Commonly used transceiver modules Whether can be Whether can be Transceiver module Application scenarios an optical an electrical type transceiver transceiver Generally used for 100/1000 SFP (Small Form-factor Mbps Ethernet ports or POS Pluggable) 155M/622M/2.5G ports... -
Page 54: Solving System Faults
NOTE: For more information about the transceiver module displaying commands, see HPE FlexNetwork HSR6600 Routers Command References. Solving system faults Solving system faults When the system detects faults (such as system instruction faults, invalid addresses, data overflow, null pointers, and division by zero operations) during the operation of the active MPU or standby MPU, you can solve the problem in one of the following methods: •... -
Page 55: Rebooting The Router
Purpose Command Remarks startup configuration file that will be used at the next system startup NOTE: • The configuration file must be with extension .cfg. • During the execution of the save command, the startup configuration file to be used at the next system startup may be lost if the router reboots or the power supply fails. -
Page 57: Troubleshooting
When the system is over-temperature. In this case, the system displays the following output: %Dec 7 11:17:01:436 2011 HPE DRVMSG/3/TEMP_ALARM: CPU temperature is greater than alarm upper limit in slot 0, index is 0. To solve the problem, check the output (such as the system temperature, insufficient available power,... -
Page 58: Fip Module Failure
If the cause cannot be located in the steps above and the problem persists, record the above information, and contact your local sales agent. Table 21 Router status LED description Status Remarks The power supply is not in position. Steady green The power supply is supplying power properly. -
Page 59: Fan Failures
Fan tray is absent After the router is booted, the following information may appear on the configuration terminal: #Dec 9 09:57:12:560 2011 HPE DEVM/1/FAN STATE CHANGES TO FAILURE: Trap 1.3.6.1.4.1.25506.8.35.12.1.6: fan ID is 1 %Dec 9 09:57:12:560 2011 HPE DEVM/3/FAN_ABSENT: Fan 1 is absent. -
Page 60: Him/Mim Failures
If the cause cannot be located in the steps above and the problem persists, contact your local sales agent. HIM/MIM failures When a HIM/MIM is plugged while the router is running, the following information may appear on the configuration terminal: %Dec 30 09:54:10:264 2011 66mcp DRVICOUT/1/DrvIcOutStr: Card in Slot 4 Sublot 2 can not be recognized ! The output indicates that the HIM/MIM is faulty or the router cannot recognize the HIM/MIM. -
Page 61: No Response From The Serial Port
No response from the serial port If the serial port gives no response, verify that the serial port settings are correct. NOTE: For more information about the serial port settings, see “Setting terminal parameters.” Password loss CAUTION: Dealing with console login password loss and user privilege level password loss from BootWare menus is disruptive. -
Page 62: Dealing With Console Login Password Loss When Password Recovery Capability Is Enabled
Booting Normal Extend BootWare..…… BootWare Validating... Press Ctrl+B to enter extended boot menu... Press Ctrl + B within three seconds after the "Press Ctrl+B to enter extended boot menu..." prompt message appears. BootWare password: Not required. Please press Enter to continue. Press Enter and read the password recovery capability state message displayed before the EXTEND-BOOTWARE menu. -
Page 63: Dealing With User Privilege Level Password Loss When Password Recovery Capability Is Enabled
|<9> Storage Device Operation |<0> Reboot ============================================================================ Ctrl+Z: Access EXTEND-ASSISTANT MENU Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 6 After the configuration skipping flag is set successfully, the following message appears: Flag Set Success. When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router. The router starts up with empty configuration. -
Page 64: Dealing With Password Loss When Password Recovery Capability Is Disabled
|<0> Reboot ============================================================================ Ctrl+Z: Access EXTEND-ASSISTANT MENU Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 8 The router deletes the user privilege level password configuration commands from the main next-startup configuration file. After the operation is completed, the following message appears: Clear Super Password Success! When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router. -
Page 65: Cooling System Failure
7 11:50:13:244 2011 HPE DEVM/1/BOARD TEMPERATURE NORMAL: Trap 1.3.6.1.4.1.25506.8.35.12.1.17: chassisIndex is 0, slotIndex 0.0 %Dec 7 11:50:13:244 2011 HPE DEVM/5/BOARD_TEMP_NORMAL: Board temperature changes to normal on Chassis 0 Slot 0, type is HSR6602-XG. When the environmental or CPU temperature of a module exceeds the critical temperature threshold, the ALM LED of the router is red. -
Page 66: Interface Module, Cable, And Connection Failure
If the temperature inside the module still reaches the critical temperature threshold, power off the router immediately and contact your local sales agent. NOTE: For more information about the display environment command, see HPE FlexNetwork HSR6600 Routers Fundamentals Command Reference. Interface module, cable, and connection failure After an HIM/MIM is installed and the router is powered on, the LEDs on the HIM/MIM panel may indicate abnormal operation. -
Page 67: Ftp Upgrade Failure
Can't connect to the remote host To solve this problem, configure the network port correctly, and make sure the network port is up and you can successfully ping the TFTP server from the network port. NOTE: The barcode stuck on the router chassis contains production and servicing information. Before you return a faulty router for serving, provide the barcode information of the router to your local sales agent. -
Page 68: Document Conventions And Icons
To solve this problem, download the application package again or set the file properties in the BootWare file list. Document conventions and icons Conventions This section describes the conventions used in the documentation. Port numbering in examples The port numbers in this document are for illustration only and might be unavailable on your device. Command conventions Convention Description... -
Page 69: Network Topology Icons
An alert that provides helpful information. TIP: Network topology icons Convention Description Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. -
Page 70: Support And Other Resources
Support and other resources Accessing Hewlett Packard Enterprise Support • For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website: www.hpe.com/assistance • To access documentation and support services, go to the Hewlett Packard Enterprise Support Center website: www.hpe.com/support/hpesc Information to collect •... -
Page 71: Websites
For more information and device support details, go to the following website: www.hpe.com/info/insightremotesupport/docs Documentation feedback Hewlett Packard Enterprise is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (docsfeedback@hpe.com). When submitting your feedback, include the document title,... - Page 72 part number, edition, and publication date located on the front cover of the document. For online help content, include the product name, product version, help edition, and publication date located on the legal notices page.
-
Page 73: Appendix A Chassis Views And Technical Specifications
Table IMPORTANT: For regulatory identification purposes, every HSR6600 Router is assigned a regulatory model number (RMN). These regulatory numbers should not be confused with the marketing name HPE HSR6600, or product codes. Table 24 HPE FlexNetwork HSR6600 Router Series models... -
Page 74: Chassis Views
Chassis views Figure 48 HSR6602-G/HSR6602-G TAA front view (1) 1000 Mbps Ethernet port (2) CF card slot (CF CARD) (3) CF card LED (4) Status LED (5) USB port (6) Reset button (RESET) (7) Auxiliary port (AUX) (8) Console port (CONSOLE) (9) Management Ethernet port (MANAGEMENT) (10) FIP slot (slot 1) Figure 49 HSR6602-XG/HSR6602-XG TAA front view... -
Page 75: Dimensions And Weights
Figure 50 HSR6600 rear view (1) Power supply slots (PWR1, PWR2) (2) Grounding screw (3) Grounding sign (4) Fan tray Dimensions and weights Table 28 Dimensions and weight Item Dimensions (H × W × D) Weight Chassis 88 × 440 × 480 mm (3.46 × 17.32 × 18.90 in) 12.1 kg (26.68 lb) FIP module 45 ×... -
Page 76: Power Consumption
Do not install AC and DC power supplies on the same router. Each HPE HSR6600 router provides two power supply slots, PWR1 and PWR2 on its rear panel, and is shipped with a filler panel in the PWR2 slot. You can install one or two power supplies for the router as needed. -
Page 77: Dc Power Supply
Item Specification Rated voltage range 100 VAC to 240 VAC; 50 Hz or 60 Hz Maximum input current Maximum power 300 W DC power supply Figure 52 DC power supply appearance (1) DC-input terminal block (2) Power input status LED (3) Power output status LED (4) Handle (5) Power switch... -
Page 78: Fan Tray Specifications
Fan tray specifications Figure 53 Fan tray (1) Handle Table 33 Fan tray specifications Item Specification Model RT-FANF Automatic speed adjustment Supported Fool-proof design Supported Hot swapping Supported Noise level 55 dBA to 65 dBA Heat dissipation 102 BTU Port specifications Ports and slots The USB port is available only on the BootWare menu. -
Page 79: Console Port
Console port Table 35 Console port specifications Item Specification Connector RJ-45 Standard compliant Asynchronous EIA/TIA-232 Baud rate 9600 bps (default) to 115200 bps Transmission distance ≤ 15 m (49.21 ft) Provides connection to the serial port of a local PC to run the terminal Services emulation program AUX port... -
Page 80: Combo Interface
Combo interface Copper Ethernet port Table 38 Copper Ethernet port specifications Item Specification Connector RJ-45 Interface type Automatic MDI/MDI-X Ethernet_II Frame format Ethernet_SNAP 10 Mbps, half/full-duplex Interface speed and duplex mode 100 Mbps, half/full-duplex 1000 Mbps, full-duplex NOTE: • The media dependent interface (MDI) standard is typically used on the Ethernet port of network adapters. -
Page 81: 10 Gbps Ethernet Port
Max. Central Transmission Model Connector Optical fiber transmission wavelength rate distance 1310 nm 9/125 µm 40 km SFP-FE-LH 1310 nm single-mode optical 155 Mbps 40-SM1310 (24.86 miles) fiber 9/125 µm 80 km SFP-FE-LH 1550 nm single-mode optical 155 Mbps 80-SM1550 (49.71 miles) fiber 62.5/125 µm... -
Page 82: Flexible Interface Platform Modules
Table 41 10 Gbps Ethernet port specifications Item Specification Protocol 802.3ae Connector type Transceiver module type SFP+ Physical layer 10GBASE-R/W • LAN PHY—10.3125 Gbps Transmission rate • WAN PHY—9.95328 Gbps Table 42 Transceiver modules for the SFP+ ports Max. Central Connector Model Fiber type... - Page 83 (1) Slot 4 (2) Slot 3 (3) OPEN BOOK mark (4) Status LED (RUN) (5) Slot 1 (6) Slot 2 The OPEN BOOK mark indicates that the operator must read the following sections before working with the FIP: Table 43 References for FIP operations Operation Reference Install and remove the FIP...
-
Page 84: Interface Modules
Ethernet, POS, and E1. NOTE: • No interface modules are supplied with the router. Purchase them yourself. • An interface module must be installed on a FIP. • For information about interface module specifications, see HPE FlexNetwork 6600/HSR6600/HSR6800 Router Series Interface Module Guide. -
Page 85: Appendix B Leds
The system is accessing the CF card. In this state, (yellow/green) Flashing green do not remove the CF card. Steady yellow It is a non-HPE CF card. The power supply is not in position. Steady green The power supply is supplying power properly. PWR1... -
Page 86: Hsr6602-Xg/Hsr6602-Xg Taa Panel Leds
Status Description (green) Flashing at 1 Hz The router operates properly as configured. Software is being loaded or the router does not start Flashing at 8 Hz working yet. The corresponding interface is not connected. LINK Steady green A 1000 Mbps link is present. Steady yellow A 10/100 Mbps link is present. - Page 87 The system is accessing the CF card. In this state, Flashing green do not remove the CF card. Steady yellow It is a non-HPE CF card. The power supply is not in position. Steady green The power supply is supplying power properly.
-
Page 88: Fip Leds
Application software is being loaded (in this case, never power (green) Flashing at 8 Hz off the router or hot-swap the FIP; otherwise, the FIP may be damaged). HIM/MIM LEDs For description of HIM/MIM LEDs, see HPE FlexNetwork 6600/HSR6600/HSR6800 Router Series Interface Module Guide. -
Page 89: Power Supply Leds
Power supply LEDs Figure 60 AC power supply LED Table 48 AC power supply LED description Status Description No power is input or the power supply has an input problem. (green) Steady green The power input is normal. No power is output or the power supply has an output problem. Steady green The power output is normal. -
Page 90: Appendix C Cable Management
Appendix C Cable management When an HSR6600 router is mounted in a 19-inch standard rack, the interface cables are routed through the cable management brackets, bound at cabling racks on chassis sides, and then routed up or down, depending on the available equipment room condition. The power cables run along the two sides of the chassis and out of the chassis either from the chassis top or the raised floor depending on the equipment room conditions (power distribution cabinet, lightning protection box, and connector strip, etc.) of the exchange office. - Page 91 Figure 62 Correct and incorrect cable binding • The cable bend radius at connectors must be at least 5 times the cable diameter, and must be at least twice the cable diameter away from the connectors. • Route different types of cables (for example, power cables, and signal cables) separately. If they are close to one another, cross them over one another.
- Page 92 Figure 64 Binding the cables • Route, bind, and attach excess cables for easy, safe maintenance activities and proper operations. • Do not tie the power cables to the slide rails. • When you connect a cable to an articulated part, for example, when you connect a grounding cable to a cabinet door, leave enough slack in cables and make sure they are not stressed from any movement of the part.
-
Page 93: Cable Routing Example
Cable bundle diameter (mm) Space between bundles (mm) 200 to 300 • Do not tie cables or bundles in a knot. • The metal parts of the crimped cold-pressed terminal blocks (such as circuit breaker) cannot protrude beyond the blocks. Cable routing example Cables on an HSR6600 router can be routed as shown in Figure... -
Page 94: Appendix D Arranging Slots And Numbering Interfaces
Appendix D Arranging slots and numbering interfaces Slot arrangement The router provides many types of interfaces, such as console, AUX, GigabitEthernet, serial (synchronous), POS, and E1 ports. This chapter describes how these interfaces are numbered. Figure 67 Slot arrangement on the HSR6602-G/HSR6602-G TAA Figure 68 Slot arrangement on the HSR6602-XG/HSR6602-XG TAA NOTE: Figure 67... -
Page 95: Example
• X—Number of the slot where the FIP resides. Different HIMs/MIMs on the same FIP have the same slot number X. • Y—Sub-slot number, the number of the slot where the HIM/MIM resides on the FIP. Different interfaces on the same HIM/MIM have the same sub-slot number Y. •... -
Page 96: Index
Index A C D E F G H I L N P R S U Accessories,7 Installation flow,8 Application file missing errors,61 Installing a CF card,15 Available slots for FIP-10/FIP-20,88 Installing a FIP module,13 Installing a HIM,14 Installing a MIM,15 Cable management guidelines,84 Installing a power... - Page 97 Slot arrangement,88 Software upgrade failures,60 Unpacking the router,9 Solving system faults,48 Storage media,69...
Need help?
Do you have a question about the FlexNetwork HSR6600 and is the answer not in the manual?
Questions and answers