Session Log Packets-Active; Session Log Time-Active - HPE FlexNetwork HSR6800 Security Command Reference

session log packets-active

Use session log packets-active to set the packet count threshold for session logging.
Use undo session log packets-active to restore the default.
Syntax
session log packets-active packets-value
undo session log packets-active
Default
The system does not output session logs based on the packet count threshold.
Views
System view
Default command level
2: System level
Parameters
packets-value: Packet count threshold for session logging, in the range of 1 to 1000 mega-packets.
Examples
# Set the packet count threshold for session logging to 10 mega-packets.
<Sysname> system-view
[Sysname] session log packets-active 10

session log time-active

Use session log time-active to set the holdtime threshold for session logging.
Use undo session log time-active to remove the setting.
Syntax
session log time-active time-value
undo session log time-active
Default
The system does not output session logs based on holdtime threshold.
Views
System view
Default command level
2: System level
Parameters
time-value: Holdtime threshold, in minutes. It is a multiple of 10 in the range of 10 to 120.
Examples
# Set the holdtime threshold for session logging to 50 minutes.
<Sysname> system
[Sysname] session log time-active 50
392