Display Sftp Client Source - HPE FlexNetwork HSR6800 Security Command Reference

Syntax
dir [ -a | -l ] [ remote-path ]
Views
SFTP client view
Default command level
3: Manage level
Parameters
-a: Displays the names of the files and sub-directories under the specified directory.
-l: Displays detailed information about the files and sub-directories under the specified directory in
the form of a list.
remote-path: Specifies the directory to be queried. If this argument is not specified, the command
displays information about the files and sub-directories under the current working directory.
Usage guidelines
If you do not specify the –a keyword or the –l keyword, the command displays detailed information
about the files and sub-directories under the specified directory in the form of a list.
This command functions as the ls command.
Examples
# Display detailed information about the files and sub-directories under the current working directory
in the form of a list.
sftp-client> dir
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
drwxrwxrwx
drwxrwxrwx
-rwxrwxrwx

display sftp client source

Use display sftp client source to display the source IP address or source interface configured for
the SFTP client.
Syntax
display sftp client source [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1759 Aug 23 06:52 config.cfg
225 Aug 24 08:01 pubkey2
283 Aug 24 07:39 pubkey1
225 Sep 28 08:28 pub1
0 Sep 28 08:24 new1
0 Sep 28 08:18 new2
225 Sep 28 08:30 pub2
340