Ipsec Transform-Set; Pfs - HPE FlexNetwork HSR6800 Security Command Reference

The SA lifetime applies to only IKE negotiated SAs. It is not effective on manually configured SAs.
Examples
# Set the time-based global SA lifetime to 7200 seconds (2 hours).
<Sysname> system-view
[Sysname] ipsec sa global-duration time-based 7200
# Set the traffic-based global SA lifetime to 10240 kilobytes (10 Mbytes).
[Sysname] ipsec sa global-duration traffic-based 10240
Related commands
•
sa duration
•
display ipsec sa duration

ipsec transform-set

Use ipsec transform-set to create an IPsec transform set and enter IPsec transform set view.
Use undo ipsec transform-set to delete an IPsec transform set.
Syntax
ipsec transform-set transform-set-name
undo ipsec transform-set transform-set-name
Default
No IPsec transform set exists.
Views
System view
Default command level
2: System level
Parameters
transform-set-name: Specifies the name of an IPsec transform set, a case-insensitive string of 1 to
32 characters.
Examples
# Create an IPsec transform set named tran1 and enter its view.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-ipsec-transform-set-tran1]
Related commands
display ipsec transform-set

pfs

Use pfs to enable and configure the perfect forward secrecy (PFS) feature so that the system uses
the feature when employing the IPsec policy or IPsec profile to initiate a negotiation.
Use undo pfs to remove the configuration.
Syntax
pfs { dh-group1 | dh-group2 | dh-group5 | dh-group14 }
283