Ipsec Profile (Tunnel Interface View) - HPE FlexNetwork HSR6800 Security Command Reference

Syntax
ipsec profile profile-name
undo ipsec profile profile-name
Default
No IPsec profile exists.
Views
System view
Default command level
2: System level
Parameters
profile-name: Specifies the name for the IPsec profile, a case-insensitive string of 1 to 15 characters.
Usage guidelines
IPsec profiles can be applied to only DVPN interfaces and IPsec tunnel interfaces.
Examples
# Create IPsec profile profile1 and enter its view.
<Sysname> system-view
[Sysname] ipsec profile profile1
[Sysname-ipsec-profile-profile1]
Related commands
•

ipsec profile (tunnel interface view)

•
display ipsec profile
ipsec profile (tunnel interface view)
Use ipsec profile to apply an IPsec profile to a DVPN tunnel interface or an IPsec tunnel interface.
Use undo ipsec profile to remove the application.
Syntax
ipsec profile profile-name
undo ipsec profile
Default
No IPsec profile is applied to a DVPN tunnel interface or an IPsec tunnel interface, and no IPsec
protection is provided.
Views
Tunnel interface view
Default command level
2: System level
Parameters
profile-name: Specifies the name of the IPsec profile, a case-insensitive string of 1 to 15 characters.
Usage guidelines
Only one IPsec profile can be applied to a tunnel interface.
281