HPE FlexNetwork HSR6800 Security Command Reference page 282

Syntax
display ipsec transform-set [ transform-set-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
transform-set-name: Specifies the name of an IPsec transform set, a string of 1 to 32 characters. If
you do not specify an IPsec transform set, the command displays information about all IPsec
transform sets.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays information about all IPsec transform
sets.
Examples
# Display information about all IPsec transform sets.
<Sysname> display ipsec transform-set
IPsec transform-set name: tran1
encapsulation mode: tunnel
ESN : disable
ESN scheme: NO
transform: esp-new
ESP protocol:
Integrity: md5-hmac-96
Encryption: des
IPsec transform-set name: tran2
encapsulation mode: transport
transform: esp-new
ESP protocol:
Integrity: md5-hmac-96
Encryption: des
Table 43 Command output
Field
IPsec transform-set name
encapsulation mode
transform
Description
Name of the IPsec transform set.
Encapsulation mode used by the IPsec transform set, transport or tunnel.
Security protocols used by the IPsec transform set: AH, ESP, or both. If both
protocols are configured, IPsec uses ESP before AH.
269