Ike Sa Keepalive-Timer Timeout - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Views
System view
Default command level
2: System level
Parameters
seconds: Specifies the transmission interval of ISAKMP SA keepalives in seconds, in the range of 20
to 28,800.
Usage guidelines
The keepalive interval configured at the local end must be shorter than the keepalive timeout
configured at the remote end.
Examples
# Set the keepalive interval to 200 seconds.
<Sysname> system-view
[Sysname] ike sa keepalive-timer interval 200
Related commands
ike sa keepalive-timer timeout
ike sa keepalive-timer timeout
Use ike sa keepalive-timer timeout to set the ISAKMP SA keepalive timeout.
Use undo ike sa keepalive-timer timeout to disable the function.
Syntax
ike sa keepalive-timer timeout seconds
undo ike sa keepalive-timer timeout
Default
No keepalive packet is sent.
Views
System view
Default command level
2: System level
Parameters
seconds: Specifies the ISAKMP SA keepalive timeout in seconds, in the range of 20 to 28800.
Usage guidelines
The keepalive timeout configured at the local end must be longer than the keepalive interval
configured at the remote end. Since it seldom occurs that more than three consecutive packets are
lost on a network, the keepalive timeout can be configured to be three times of the keepalive interval.
Examples
# Set the keepalive timeout to 20 seconds.
<Sysname> system-view
[Sysname] ike sa keepalive-timer timeout 20
318
Advertisement
Table of Contents
