Mac-Authentication - HPE FlexNetwork HSR6800 Security Command Reference

Field
Authenticate success: 0, failed: 0
Max number of on-line users
Current online user number
MAC Addr
Authenticate state
AuthIndex

mac-authentication

Use mac-authentication in system view to enable MAC authentication globally.
Use mac-authentication interface interface-list in system view to enable MAC authentication on a
list of ports, or use mac-authentication in interface view to enable MAC authentication on a port.
Use undo mac-authentication in system view to disable MAC authentication globally.
Use undo mac-authentication interface interface-list in system view to disable MAC
authentication on a list of ports, or use undo mac-authentication in interface view to disable MAC
authentication on a port.
Syntax
In system view:
mac-authentication [ interface interface-list ]
undo mac-authentication [ interface interface-list ]
In Ethernet interface view:
mac-authentication
undo mac-authentication
Default
MAC authentication is not enabled globally or on any port.
Views
System view, Ethernet interface view
Default command level
2: System level
Parameters
interface interface-list: Specifies an Ethernet port list, in the format of { interface-type
interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10> indicates that you
can specify up to 10 port ranges. The start port and end port of a port range must be of the same type
Description
MAC authentication statistics, including the number of successful and
unsuccessful authentication attempts.
Maximum number of concurrent online users allowed on the port.
If MAC authentication is not enabled on the port, the field displays 0.
Number of online users on the port.
MAC address of the online user.
User status:
•
MAC_AUTHENTICATOR_CONNECT—The user is logging in.
•
MAC_AUTHENTICATOR_SUCCESS—The user has passed the
authentication.
•
MAC_AUTHENTICATOR_FAIL—The user failed the
authentication.
•
MAC_AUTHENTICATOR_LOGOFF—The user has logged off.
Authenticator index.
134