Ip Source Guard Configuration Commands; Display Ip Source Binding - HPE FlexNetwork HSR6800 Security Command Reference

IP source guard configuration commands

IP source guard configuration commands are available only for SAP interface modules operating in
Layer 2 mode.

display ip source binding

Use display ip source binding to display IPv4 source guard entries.
Syntax
In standalone mode:
display ip source binding [ static ] [ interface interface-type interface-number | ip-address
ip-address | mac-address mac-address ] [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
In IRF mode:
display ip source binding [ static ] [ interface interface-type interface-number | ip-address
ip-address | mac-address mac-address ] [ chassis chassis-number slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
static: Displays static IPv4 source guard entries. If you do not specify this keyword, the command
displays all static and dynamic IPv4 source guard entries.
interface interface-type interface-number: Displays IPv4 source guard entries of the interface
specified by its type and number.
ip-address ip-address: Displays IPv4 source guard entries of an IP address.
mac-address mac-address: Displays IPv4 source guard entries of an MAC address (in the format
H-H-H).
slot slot-number: Displays IPv4 source guard entries for a card. The slot-number argument specifies
the number of the slot that holds the card. (In standalone mode.)
chassis chassis-number slot slot-number: Displays IPv4 source guard entries for a card on an IRF
member device. The chassis-number argument specifies the ID of the IRF member device. The
slot-number argument specifies the number of the slot that holds the card. (In IRF mode.)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
When you do not use the static keyword, the command displays both static and dynamic IPv4
source guard entries. If you specify neither a port nor an interface card, the command displays static
and dynamic IPv4 source guard entries on all ports.
452