Ike Sa Nat-Keepalive-Timer Interval; Interval-Time - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Related commands
ike sa keepalive-timer interval
ike sa nat-keepalive-timer interval
Use ike sa nat-keepalive-timer interval to set the NAT keepalive interval.
Use undo ike sa nat-keepalive-timer interval to disable the function.
Syntax
ike sa nat-keepalive-timer interval seconds
undo ike sa nat-keepalive-timer interval
Default
The NAT keepalive interval is 20 seconds.
Views
System view
Default command level
2: System level
Parameters
seconds: Specifies the NAT keepalive interval in seconds, in the range of 5 to 300.
Examples
# Set the NAT keepalive interval to 5 seconds.
<Sysname> system-view
[Sysname] ike sa nat-keepalive-timer interval 5
interval-time
Use interval-time to set the DPD query triggering interval for a DPD detector.
Use undo interval-time to restore the default.
Syntax
interval-time interval-time
undo interval-time
Default
The default DPD interval is 10 seconds.
Views
IKE DPD view
Default command level
2: System level
Parameters
interval-time: Sets DPD interval in seconds, in the range of 1 to 300 seconds. When the local end
sends an IPsec packet, it checks the time the last IPsec packet was received from the peer. If the
time interval exceeds the DPD interval, it sends a DPD hello to the peer.
319
Advertisement
Table of Contents
