Pki Import-Certificate - HPE FlexNetwork HSR6800 Security Command Reference

Syntax
pki entity entity-name
undo pki entity entity-name
Default
No entity exists.
Views
System view
Default command level
2: System level
Parameters
entity-name: Specifies a PKI entity name, a case-insensitive string of 1 to 15 characters.
Usage guidelines
You can configure a variety of attributes for an entity in PKI entity view. An entity is intended only for
convenience of reference by other commands.
Examples
# Create a PKI entity named en and enter its view.
<Sysname> system-view
[Sysname] pki entity en
[Sysname-pki-entity-en]

pki import-certificate

Use pki import-certificate to import a CA certificate or local certificate from a file and save it locally.
Syntax
pki import-certificate { ca | local } domain domain-name { der | p12 | pem } [ filename filename ]
Views
System view
Default command level
2: System level
Parameters
ca: Specifies the CA certificate.
local: Specifies the local certificate.
domain-name: Specifies a PKI domain by its name, a string of 1 to 15 characters.
der: Specifies the certificate format of DER.
p12: Specifies the certificate format of P12.
pem: Specifies the certificate format of PEM.
filename filename: Specifies the name of the certificate file to import, a case-insensitive string of 1 to
127 characters. If no file is specified, the system uses the default file name that is used when the
certificate
domain-name_peerentity_entity-name.cer.
is obtained, that is domain-name_ca.cer,
246
domain-name_local.cer, or