Port-Security Authorization Ignore - HPE FlexNetwork HSR6800 Security Command Reference

0002-0002-0002
000d-88f8-0577
--- 2 mac address(es) found
# Display information about secure MAC addresses on port GigabitEthernet 3/0/1.
<Sysname> display port-security mac-address security interface gigabitethernet 3/0/1
MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
# Display information about secure MAC addresses of port GigabitEthernet 3/0/1 in VLAN 1.
<Sysname> display port-security mac-address security interface gigabitethernet 3/0/1 vlan
1
MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
Table 22 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME
2 mac address(es) found
Related commands
port-security mac-address security

port-security authorization ignore

Use port-security authorization ignore to configure a port to ignore the authorization information
received from the server (an RADIUS server or the local device).
Use undo port-security authorization ignore to restore the default.
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Ethernet interface view
1 Security
1 Security
---
VLAN ID STATE
1 Security
---
VLAN ID STATE
1 Security
---
Description
Secure MAC address.
ID of the VLAN to which the port belongs.
Type of the MAC address added. "Security" means it is a secure
MAC address.
Port to which the secure MAC address belongs.
Period of time before the secure MAC address ages out. "NOAGED"
is displayed for secure MAC addresses.
Number of secure MAC addresses stored.
GigabitEthernet3/0/1
GigabitEthernet3/0/1
PORT INDEX
GigabitEthernet3/0/1
PORT INDEX
GigabitEthernet3/0/1
177
NOAGED
NOAGED
AGING TIME
NOAGED
AGING TIME
NOAGED