Ike-Peer (Ipsec Policy View/Ipsec Policy Template View/Ipsec Profile View); Ipsec Anti-Replay Check - HPE FlexNetwork HSR6800 Security Command Reference

[Sysname] ipsec transform-set prop1
[Sysname-ipsec-transform-set-prop1] transform esp
[Sysname-ipsec-transform-set-prop1] esp encryption-algorithm 3des
Related commands
•
display ipsec transform-set
•
esp authentication-algorithm
ike-peer (IPsec policy view/IPsec policy template view/IPsec
profile view)
Use ike-peer to reference an IKE peer in an IPsec policy, IPsec policy template, or IPsec profile
configured through IKE negotiation.
Use undo ike peer to remove the reference.
This command applies only to IKE negotiation mode.
Syntax
ike-peer peer-name
undo ike-peer peer-name
Views
IPsec policy view, IPsec policy template view, IPsec profile view
Default command level
2: System level
Parameters
peer-name: Specifies the IKE peer name, a string of 1 to 32 characters.
Examples
# Configure a reference to an IKE peer in an IPsec policy.
<Sysname> system-view
[Sysname] ipsec policy policy1 10 isakmp
[Sysname-ipsec-policy-isakmp-policy1-10] ike-peer peer1
# Configure a reference to an IKE peer in an IPsec profile.
<Sysname> system-view
[Sysname] ipsec profile profile1
[Sysname-ipsec-profile- profile1] ike-peer peer1
Related commands
•
ipsec policy
•
ipsec profile

ipsec anti-replay check

Use ipsec anti-replay check to enable IPsec anti-replay checking.
Use undo ipsec anti-replay check to disable IPsec anti-replay checking.
Syntax
ipsec anti-replay check
274