Display Flow-Statistics Statistics Interface - HPE FlexNetwork HSR6800 Security Command Reference

display flow-statistics statistics interface

Use display flow-statistics statistics interface to display the traffic statistics of an interface.
Syntax
display flow-statistics statistics interface interface-type interface-number { inbound | outbound }
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
inbound: Displays traffic statistics in the inbound direction of an interface.
outbound: Displays traffic statistics in the outbound direction of an interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the inbound traffic statistics of interface GigabitEthernet 3/0/1.
<Sysname> display flow-statistics statistics interface gigabitethernet 3/0/1 inbound
------------------------------------------------------------
Interface
------------------------------------------------------------
Total number of existing sessions
Session establishment rate
TCP sessions
Half-open TCP sessions
Half-close TCP sessions
TCP session establishment rate
UDP sessions
UDP session establishment rate
ICMP sessions
ICMP session establishment rate
RAWIP sessions
RAWIP session establishment rate
Flow Statistics Information
: GigabitEthernet3/0/1
: 70
: 10/s
: 10
: 10
: 10
: 10/s
: 10
: 10/s
: 10
: 10/s
: 10
: 10/s
440