Scp - HPE FlexNetwork HSR6800 Security Command Reference

scp

Use scp to transfer files with an SCP server.
Syntax
In non-FIPS mode:
scp [ ipv6 ] server [ port-number ] { get | put } source-file-path [ destination-file-path ] [ identity-key
{ dsa | rsa } | prefer-compress { zlib | zlib-openssh } | prefer-ctos-cipher { 3des | aes128 | des }
| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
scp [ ipv6 ] server [ port-number ] { get | put } source-file-path [ destination-file-path ] [ identity-key
rsa | prefer-compress { zlib | zlib-openssh } | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 |
aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] *
Views
User view
Default command level
3: Manage level
Parameters
ipv6: Specifies the type of the server as IPv6. If this keyword is not specified, the server is an IPv4
server.
server: Specifies an IPv4 or IPv6 server by its address or host name. For an IPv4 server, it is a
case-insensitive string of 1 to 20 characters. For an IPv6 server, it is a case-insensitive string of 1 to
46 characters.
port-number: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
get: Downloads the file.
put: Uploads the file.
source-file-path: Specifies the directory of the source file.
destination-file-path: Specifies the directory of the target file. If this argument is not specified, the
directory names of the source and target files are same.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. In non-FIPS
mode, the algorithm is either dsa or rsa. In FIPS mode, the algorithm is rsa.
•
dsa: Specifies the public key algorithm dsa.
•
rsa: Specifies the public key algorithm rsa.
prefer-compress: Specifies the preferred compression algorithm. By default, the compression
algorithm is not used.
•
zlib: Specifies the compression algorithm ZLIB.
•
zlib-openssh: Specifies the compression algorithm ZLIB@openssh.com.
prefer-ctos-cipher: Specifies the preferred client-to-server encryption algorithm. The default is
aes128.
•
3des: Specifies the encryption algorithm 3des-cbc. This keyword is not available in FIPS mode.
•
aes128: Specifies the encryption algorithm aes128-cbc.
•
aes256: Specifies the encryption algorithm aes256-cbc. This keyword is not available in
non-FIPS mode.
348