Syntax
In standalone mode:
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name [ slot slot-number ]
In IRF mode:
reset
stop-accounting-buffer
chassis-number slot slot-number ]
Views
User view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies buffered stop-accounting requests that are
destined for the accounting server defined in an HWTACACS scheme. The HWTACACS scheme
name is a case-insensitive string of 1 to 32 characters.
slot slot-number: Specifies a card by its slot number. The slot-number argument represents the slot
number of the card. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device, and the
slot-number argument represents the slot number of the card. (In IRF mode.)
Examples
# Clear the stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1
Related commands
•
stop-accounting-buffer enable
•
display stop-accounting-buffer
retry stop-accounting (HWTACACS scheme view)
Use retry stop-accounting to set the maximum number of stop-accounting request transmission
attempts.
Use undo retry stop-accounting to restore the default.
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
Default
The maximum number of stop-accounting request transmission attempts is 100.
Views
HWTACACS scheme view
Default command level
2: System level
hwtacacs-scheme
97
hwtacacs-scheme-name
[
chassis