HPE FlexNetwork HSR6800 Security Command Reference page 67

Table 5 Command output
Field
SchemeName
Index
Type
Primary Auth Server
Primary Acct Server
Second Auth Server
Second Acct Server
IP
Port
State
Encryption Key
VPN instance
Probe username
Probe interval
Auth Server Encryption Key
Acct Server Encryption Key
VPN instance
Accounting-On packet disable
send times
interval
Interval for timeout(second)
Retransmission times for
timeout
Interval for realtime
accounting(minute)
Retransmission times of
realtime-accounting packet
Retransmission times of
stop-accounting packet
Quiet-interval(min)
Description
Name of the RADIUS scheme.
Index number of the RADIUS scheme.
Type of the RADIUS server supported on the router:
•
Extended—The RADIUS server uses the proprietary RADIUS
protocol of Hewlett Packard Enterprise for packet exchange.
•
Standard—The RADIUS server uses the standard RADIUS protocol
for packet exchange. The protocol is compliant to RFC 2865 and
RFC 2866 or later.
Information about the primary authentication server.
Information about the primary accounting server.
Information about the secondary authentication server.
Information about the secondary accounting server.
IP address of the server.
Service port of the server. If no port configuration is performed, the default
port number is displayed.
Status of the server: active or blocked.
Shared key for secure authentication or accounting communication,
displayed as a series of asterisks (******). If no shared key is configured,
this field displays N/A.
MPLS L3VPN to which the server belongs. If no VPN instance is specified
for the server, this field does not appear.
Username used for server status detection.
Server status detection interval, in minutes.
Shared key for secure authentication communication, displayed as a
series of asterisks (******). If no shared key is configured, this field
displays N/A.
Shared key for secure accounting communication, displayed as a series
of asterisks (******). If no shared key is configured, this field displays N/A.
MPLS L3VPN to which the scheme belongs. If no VPN instance is
specified for the scheme, this field displays N/A.
The accounting-on feature is disabled.
Retransmission times of accounting-on packets.
Interval at which the device retransmits accounting-on packets.
RADIUS server response timeout period, in seconds.
Maximum number of attempts for transmitting a RADIUS packet to a
single RADIUS server.
Interval for real-time accounting, in minutes.
Maximum number of accounting attempts.
Maximum number of stop-accounting attempts.
Quiet interval for the primary server.
54