HPE FlexNetwork HSR6800 Security Command Reference page 483

Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Default command level
2: System level
Parameters
ip-address: Specifies a permitted sender IP address.
mac-address: Specifies a permitted sender MAC address.
Usage guidelines
You can configure up to eight ARP filtering entries on a port.
You cannot configure both arp filter source and arp filter binding commands on a port.
Examples
# Configure an ARP filtering entry with permitted sender IP address 1.1.1.1 and MAC address 2-2-2.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] arp filter binding 1.1.1.1 2-2-2
470