Stop-Accounting-Buffer Enable (Hwtacacs Scheme View); Timer Quiet (Hwtacacs Scheme View) - HPE FlexNetwork HSR6800 Security Command Reference

[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary authorization 10.163.155.13 49
Related commands
•
display hwtacacs
•
vpn-instance (HWTACACS scheme view)

stop-accounting-buffer enable (HWTACACS scheme view)

Use stop-accounting-buffer enable to enable the device to buffer stop-accounting requests to
which no responses are received.
Use undo stop-accounting-buffer enable to disable the buffering function.
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
Default
The device buffers stop-accounting requests to which no responses are received.
Views
HWTACACS scheme view
Default command level
2: System level
Usage guidelines
A NAS must make its best effort to send every stop-accounting request to the HWTACACS
accounting servers. For each stop-accounting request that receives no response in the specified
period of time, the NAS buffers and resends the packet until it receives a response or until the
number of transmission attempts reaches the configured limit. In the latter case, the NAS discards
the packet.
Examples
# In HWTACACS scheme hwt1, enable the device to buffer the stop-accounting requests that
receive no responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
Related commands
•
reset stop-accounting-buffer
•
display stop-accounting-buffer

timer quiet (HWTACACS scheme view)

Use timer quiet to set the quiet timer for the primary server.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
101