Include Serial-Number - HPE FlexNetwork HSR6800 Security Command Reference

Use undo fqdn to remove the configuration.
Syntax
fqdn name-str
undo fqdn
Default
No FQDN is specified for an entity.
Views
PKI entity view
Default command level
2: System level
Parameters
name-str: Specifies a fully qualified domain name (FQDN) for an entity, a case-insensitive string of 1
to 127 characters.
Usage guidelines
An FQDN is the unique identifier of an entity on a network. It consists of a host name and a domain
name and can be resolved into an IP address.
Examples
# Configure the FQDN of an entity as pki.domain-name.com.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] fqdn pki.domain-name.com

include serial-number

Use include serial-number to configure a PKI entity to include the device serial number in the
identity information.
Use serial-number to restore the default.
Syntax
include serial-number
undo include serial-number
Default
The PKI entity does not contain the device serial number in the identity information.
Views
PKI entity view
Default command level
2: System level
Examples
# Configure PKI entity 1 to include the device serial number in the identity information.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] include serial-number
240