<Sysname> system-view
[Sysname] ike dpd dpd2
Related commands
•
display ike dpd
•
interval-time
•
time-out
ike local-name
Use ike local-name to configure a name for the local security gateway.
Use undo ike local-name to restore the default.
Syntax
ike local-name name
undo ike local-name
Default
The device name is used as the name of the local security gateway.
Views
System view
Default command level
2: System level
Parameters
name: Specifies the name of the local security gateway for IKE negotiation, a case-sensitive string of
1 to 32 characters.
Usage guidelines
If you configure the id-type name or id-type user-fqdn command on the initiator, the IKE
negotiation peer uses the security gateway name as its ID to initiate IKE negotiation, and you must
configure the ike local-name command in system view or the local-name command in IKE peer
view on the local device. If you configure both the ike local-name command and the local-name
command, the name configured by the local-name command is used.
The IKE negotiation initiator sends its security gateway name as its ID to the peer, and the peer uses
the security gateway name configured with the remote-name command to authenticate the initiator.
Make sure the local gateway name matches the remote gateway name configured on the peer.
Examples
# Configure the local security gateway name as app.
<Sysname> system-view
[Sysname] ike local-name app
Related commands
•
remote-name
•
id-type
315