Key (Radius Scheme View) - HPE FlexNetwork HSR6800 Security Command Reference

1 1000326232326010
Total 2 record(s) Matched
Related commands
•
reset stop-accounting-buffer
•
stop-accounting-buffer enable
•
user-name-format
•
retry
•
retry stop-accounting

key (RADIUS scheme view)

Use key to set the shared key for secure RADIUS authentication/authorization or accounting
communication.
Use undo key to remove the configuration.
Syntax
key { accounting | authentication } [ cipher | simple ] key
undo key { accounting | authentication }
Default
No shared key is configured.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
accounting: Sets the shared key for secure RADIUS accounting communication.
authentication:
communication.
cipher: Sets a ciphertext shared key.
simple: Sets a plaintext shared key.
key: Specifies the shared key string. This argument is case sensitive. If simple is specified, it must
be a string of 1 to 64 characters. If cipher is specified, it must be a ciphertext string of 1 to 117
characters. If neither cipher nor simple is specified, you set a plaintext shared key string. In FIPS
mode, the shared key must be a string of at least 8 characters that contain numbers, uppercase
letters, lowercase letters, and special characters.
Usage guidelines
For secrecy, all shared keys, including keys configured in plain text, are saved in cipher text.
The shared keys specified during the configuration of the RADIUS servers take precedence.
The shared keys configured on the device must match those configured on the RADIUS servers.
Examples
# For RADIUS scheme radius1, set the shared key for secure accounting communication to ok in
plain text.
<Sysname> system-view
abc
Sets the shared key for secure RADIUS
60
23:33:01-08/31/2006
authentication/authorization