Reset Dot1X Statistics - HPE FlexNetwork HSR6800 Security Command Reference

Examples
# Enable the unicast trigger function for interface GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] dot1x unicast-trigger
Related commands
•
display dot1x
•
dot1x timer tx-period
•
dot1x retry

reset dot1x statistics

Use reset dot1x statistics to clear 802.1X statistics.
Syntax
reset dot1x statistics [ interface interface-list ]
Views
User view
Default command level
2: System level
Parameters
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10
ports or port ranges. The start port number must be smaller than the end number and the two ports
must be of the same type.
Usage guidelines
If a list of ports is specified, the command clears 802.1X statistics for all the specified ports. If no
ports are specified, the command clears all 802.1X statistics.
Examples
# Clear 802.1X statistics on port GigabitEthernet 3/0/1.
<Sysname> reset dot1x statistics interface gigabitethernet 3/0/1
Related commands
display dot1x
128