Priority Marking Configuration Examples; Local Precedence Marking Configuration Example - HPE FlexNetwork 5510 HI Series Acl And Qos Configuration Manual

Step
7. Return to system view.
8. Create a QoS policy and
enter QoS policy view.
9. Associate the traffic class
with the traffic behavior in
the QoS policy.
10. Return to system view.
11. Apply the QoS policy.
12. (Optional.)
priority
configuration.

Priority marking configuration examples

Local precedence marking configuration example

Network requirements
As shown in
Traffic source
Host A, B
Host A, B
Host A, B
Command
•
•
•
quit
qos policy policy-name
classifier
behavior-name
before-classifier-name ]
quit
•
•
•
•
Display the
display
marking
[ behavior-name ]
Figure 18, configure priority marking on the switch to meet the following requirements:
Destination
Data server
Mail server
File server
local-precedence
local-precedence-value
Set the local QoS ID for packets:
remark qos-local-id local-id-value
Set the CVLAN
remark customer-vlan-id vlan-id
Set the SVLAN
remark service-vlan-id vlan-id
classifier-name
[
Applying the QoS policy to an interface
Applying the QoS policy to a VLAN
Applying the QoS policy globally
Applying the QoS policy to a control
plane
traffic behavior
61
Remarks
service provider VLAN
(SVLAN) is the public
network VLAN assigned
by the service provider to
the customer. For more
for packets:
information
CVLAN and SVLAN, see
for packets:
Layer 2—LAN Switching
Configuration Guide.
N/A
By default,
policy exists.
behavior By default, a traffic class
insert-before is not associated with a
traffic behavior.
N/A
Choose
application destinations
as needed.
By default,
policy is applied.
user-defined
Available in any view.
Processing priority
High
Medium
Low
about the
no QoS
one of the
no QoS