Installing The Power Stacker - Printronix P7000 Series Maintenance Manual

Line matrix printers

Hide thumbs Also See for P7000 Series:

Table of Contents

Installing The Power Stacker

NOTE: This section shows installation of the power stacker assembly, the

1. Set the printer power switch to O (off).

2. Unplug the power cord.

3. Remove paper.

4. Loosen—do not remove—the three paper path hold-down screws. Slide

the paper path to the left and lift it off the card cage. (Figure 81.)

stacker cable assemblies, and the stacker control panel.

Figure 81. Remove the Paper Path

Show Quick Links

Table of Contents