Printronix P7000 Series Maintenance Manual page 535

8. Install the paper feed timing belt (page 526).
9. Set the paper feed timing belt tension (page 522).
10. Install the back cover plate. (See page 532, Figure 120.)
11. Install right cover plate. (See page 532, Figure 120.)
12. Return the printer to normal operation (page 520).
Tolerance Ring
NOTE: Align the marks on
both tractors before inserting
the splined shaft.
Figure 122. Splined Shaft and Tractor Installation
Splined
Shaft
Alignment Marks
Shaft, Splined
Tractor
535