Printronix P7000 Series Maintenance Manual page 159

Table 5. P7000 H-Series (Spool) Error Messages List
Displayed Message
B46 ERROR: SDRAM
HAS MIXED SIZES*
B47 ERROR: SDRAM
LARGER THAN 256M*
B49 ERROR: SDRAM
# LOGICAL BANKS*
Explanation
Printer boot initialization
tests detect incorrect
SDRAM.
Printer boot initialization
tests detect incorrect
SDRAM.
Printer boot initialization
tests detect incorrect
SDRAM.
List Of Messages
Solution
1. Cycle power. If the message
appears again, reseat the
SDRAM DIMM.
2. Power on the printer. If the
message appears, install a new
SDRAM DIMM of the correct type
and size.
3. Power on the printer. If the
message appears, replace the
controller board. Record the
message and return it with the
defective board.
1. Cycle power. If the message
appears again, reseat the
SDRAM DIMM.
2. Power on the printer. If the
message appears, install a new
SDRAM DIMM of the correct type
and size.
3. Power on the printer. If the
message appears, replace the
controller board. Record the
message and return it with the
defective board.
1. Cycle power. If the message
appears again, reseat the
SDRAM DIMM.
2. Power on the printer. If the
message appears, install a new
SDRAM DIMM of the correct type
and size.
3. Power on the printer. If the
message appears, replace the
controller board. Record the
message and return it with the
defective board.
159