Printronix P7000 Series Maintenance Manual page 97

Table 4. P7000 ASCII (Spool) Error Messages List
Displayed Message
PAP NOT SCHED*
PAP NT AT SPEED*
PAP UNEXP INT*
Explanation
Paper Not Scheduled. The
paper feed process is not
scheduling on the controller
board, and the printer cannot
feed paper.
Paper Not At Speed.
Firmware error on the
controller board.
Paper Unexpected Interrupt.
Firmware error on the
controller board.
List Of Messages
Solution
1. Cycle power. Run the print job
again. If the message appears,
download the emulation software
again.
2. Cycle power. Run the print job
again. If the message appears,
replace the MPU cable assembly.
3. Power on the printer. Run the
print job again. If the message
appears, do the power supply
operational check (page 264). If
the power supply fails the check,
replace it. If it passes the check,
go to the next step.
4. Power on the printer. Run the
print job again. If the message
appears, replace the shuttle
frame assembly.
5. Power on the printer. Run the
print job again. If the message
appears, replace the controller
board. Record the message and
return it with the defective board.
1. Cycle power. Run the print job
again. If the message appears,
download the emulation software
again.
2. Cycle power. Run the print job
again. If the message appears,
replace the controller board.
Record the message and return it
with the defective board.
1. Cycle power. Run the print job
again. If the message appears,
download the emulation software
again.
2. Cycle power. Run the print job
again. If the message appears,
replace the controller board.
Record the message and return it
with the defective board.
97