Removing The Power Stacker - Printronix P7000 Series Maintenance Manual

Appendix D

Removing The Power Stacker

Removing The Power Stacker
1. Set the printer power switch to O (off).
2. Unplug the power cord.
3. Unload paper from the stacker area. (Refer to the User's Manual.)
4. Remove the paper tent (if present). (Figure 73.)
5. Cut the tie wrap (if present) and remove the paper fence. (Figure 74.)
468
Figure 73. Removing the Paper Tent
Paper
Fence
Figure 74. Removing the Paper Fence
Paper Tent
Stacker
Base