Printronix P7000 Series Maintenance Manual page 267

22. Set the printer's power switch to O (off).
23. Unplug power supply connector P101 from the 12-pin connector on the
power supply tester Load Block. (Figure 21.)
24. Connect power supply cable connector P101 to either the power stacker
power cable or connector J101 on the controller board. (Figure 21.)
25. Cabinet Models: Install the paper path (page 303).
Pedestal Models: Install the top cover assembly (page 281).
26. Return the printer to normal operation (page 231).
Adjustments and Tests
267