Tools And Test Equipment - Printronix P7000 Series Maintenance Manual

Chapter 1

Tools And Test Equipment

Tools And Test Equipment
For field level maintenance of the printer, you will need these tools:
Adapter, 1/4 in. hex to 1/4 in. square, Utica HW-18
Alcohol, anhydrous
Allen Wrench, 1/16 inch
Allen Wrench, 3/32 inch
Allen Wrench, 5/32 inch
Allen Wrench, 7/64 inch
Allen Wrench, 5/64 inch
ESD Wrist Strap
Feeler Gauge, Flat, 0.010 inch
Feeler Gauge, Flat, 0.011 inch
Feeler Gauge, Flat, 0.012 inch
Feeler Gauge, Flat, 0.013 inch
Feeler Gauge, Flat, 0.040 inch
Field Kit, Tester, P5 Power Supplies, Generic, (P/N 178083-001)
Force Gauge, (Chatillon
Force Gauge, "Fish Scale" type, 0-16 oz.
Hardware Kit, P5XXX Mech, ZTP (P/N 178573-001)
Hex bit, 3/16 in., torque screwdriver
Hex bit, 3/32 in., torque screwdriver
Hex bit, 5/32 in., torque screwdriver
Hex bit, 5/64 in., torque screwdriver
Lubricant, Bearing (Printronix P/N 101805-001)
Nut Driver, 1/4 inch
Nut Driver, 5/16 inch
Nut Driver or Open End Wrench, 7/32 inch
Open End Wrench, 5/16 inch
Pliers, Grip Ring, External
Screwdriver, flat tip
Screwdriver, Phillips, #1
Screwdriver, Phillips, #2
Screwdriver, Torque, Utica TS-35
Tie Wraps, 4 inch and 8 inch
Torx T-10, T-15 Driver
30
NY, Gauge-r, 0-20 lb., CAT 719-20)
™