Attach The Output Basket (Pedestal Models); Remove The Shipping Restraints From The Optional Power Stacker - Printronix P5 Quick Setup Manual

Set Up The Printer

Attach The Output Basket (Pedestal Models)

Figure 14. Attaching the Output Basket to the Pedestal Model
1. Place the output basket in the holes in the back of the printer.
2. Screw the ground wire attached to the output basket to the
printer.
Remove The Shipping Restraints From
The Optional Power Stacker
This section applies only to printers with the power stacker
installed.
Special packaging protects the power stacker mechanisms from
damage during shipment. This section describes how to remove
the shipping restraints before you operate the printer.
Save the packaging materials. You will need to reinstall them if you
decide to move or ship the printer. To reinstall the packaging
materials, reverse the steps in this section.
18
Ground Wire
$
Screw
Output
Basket
$