Printronix P7000 Series Maintenance Manual page 94

Chapter 3
Troubleshooting Display Messages
Table 4. P7000 ASCII (Spool) Error Messages List
Displayed Message
PAP FD DRVR CIR*
See Manual
PAP FIFO OVERFL*
94
Explanation
Paper Feed Driver Circuit.
The paper feed driver circuit
on the controller board is
drawing too much current.
Paper First In First Out
Overflow. Firmware error on
the controller board.
Solution
1. Cycle power. If the message
appears, replace the controller
board. Record the message and
return it with the defective board.
2. Power on the printer. If the
message appears, replace the
paper feed motor.
1. Cycle power. Run the print job
again. If the message appears,
download the emulation software
again.
2. Power on the printer. Run the
print job again. If the message
appears, replace the controller
board. Record the message and
return it with the defective board.