CAUTION
In the next step, use ONLY the guide tool that comes with the alignment
tool to align the version 2 hammer spring assemblies. To avoid
damaging threads, never insert any metallic tool into the hammer spring
mounting holes in the hammer bank.
5. Apply a gentle, continuous downward pressure to the alignment tool and
Guide Tool
Long Tip Alignment Tool.
Apply gentle downward
pressure to hold the hammer
tips in the tool.
Figure 31. Using the guide tool to maneuver the hammer tips into the alignment tool holes.
gently swivel the guide tool in the hammer spring mounting holes to
maneuver the hammer tips into the clearance and alignment holes in the
alignment tool. You will feel and/or hear a small "click" when the hammer
tips slip into the holes. (See Figure 31.)
Alignment Holes
for Hammer
Springs
Hammer Spring Assembly, Version 2
Alignment Hole
for Hammer
Spring
Clearance
Holes for
Hammer Tips
293
Need help?
Do you have a question about the P7000 Series and is the answer not in the manual?