Printronix P7000 Series Maintenance Manual page 124

Chapter 3
Troubleshooting Display Messages
Table 5. P7000 H-Series (Spool) Error Messages List
Displayed Message
408:WRITE ERROR
CHECK FLASH
409:FRAMING
ERROR
124
Explanation
Hardware or software fault in
flash memory.
The printed output may
contain random !
(exclamation point)
characters.
Solution
1. Replace flash memory.
2. If message occurs with new
memory, replace the controller
board. Record the message and
return it with the defective board.
1. Make a configuration printout. Set
printer serial interface parameters
to match host configuration
settings for Data Protocol, Baud
Rate, Data Bits, Stop Bits, Parity,
Data Terminal Ready, and
Request to Send.
2. Send a print job to the printer. If
the message appears, go to
Communications Failures,
page 209.