Printronix P7000 Series Maintenance Manual page 472

Appendix D
Removing The Power Stacker
13. Remove two screws, washers, and the standoff from the stacker control
panel. (Figure 78.)
14. Remove four cables from the stacker control panel, and remove the
stacker control panel. (Figure 79.)
Logic Cable (P104)
Elevator I/O Cable
(P102)
Rail Cable
(P107)
472
Standoff
Washer
Short Screw
Figure 78. Removing the Stacker Control Panel
Ejection Lever
Power Cable
A
Figure 79. Removing Cables from the Stacker Control Panel
Washer
Long Screw
Remove the
Tie Wrap
A