Power Stacker; Auto Elevator; Auto Locking - Printronix P7000 User Manual

Chapter 4
ADVANCED USER

Power Stacker

This parameter allows you to enable or disable the power paper
stacker (provided this option is installed).

Auto Elevator

This parameter exists only on printers with the power paper stacker
installed. The power stacker has a sensor which detects paper
movement and raises the stacker as the printed paper stack grows.
If the printer has been printing for three minutes continually and the
sensor has not detected any growth in the paper stack, the stacker
raises itself 1/4 inch automatically.
•
Enable (default). The automatic elevator on the power stacker
operates normally.
•
Disable. The stacker does not raise automatically every three
minutes and is entirely dependent on the sensor. Diable is used
with extremely high-quality print jobs that take a long time to
print.

Auto Locking

•
Disable (default). The ENTER key must be locked manually.
•
Enable. The printer automatically locks the ENTER key five
minutes after the last front panel key press.
284