Roller Drive Shaft - Printronix P7000 Series Maintenance Manual

Replacing The Roller Drive Shaft
1. Remove the stacker assembly from the printer (page 468).
2. Unhook the right bearing pivot plate's extension spring from the tab on the
3. Using an M-2 Allen wrench, remove the screw securing the right bearing
Figure 100. Right Bearing Pivot Plate and Extension Spring
elevator. (Figure 100.)
pivot plate to the elevator. (Figure 100.)
A
Screw
Stacker Motor Check
A
Right Bearing
Pivot Plate
Extension
Spring
Tab
491