Boot Auto-Copy-Sw - Cisco catalyst 3750 Command Reference Manual

boot auto-copy-sw

boot auto-copy-sw
Use the boot auto-copy-sw global configuration command from the stack master to enable the automatic
upgrade (auto-upgrade) process. It automatically upgrades a switch in version-mismatch mode by
copying the running software image on any stack member or by copying a tar file image in switch stack
flash memory. Use the no form of this command to disable the auto-upgrade process.
Syntax Description This command has no arguments or keywords.
Defaults
Enabled.
Command Modes
Global configuration
Command History Release
12.1(11)AX
Usage Guidelines
A switch in version-mismatch mode is a switch that has a different minor version number than the
version on the stack. A switch in version-mismatch mode cannot join the stack as a fully functioning
member. If the stack has an image that can be copied to a switch in version-mismatch mode, the
auto-upgrade process automatically copies the image from a stack member to the switch in
version-mismatch mode. The switch then exits version-mismatch mode, reboots, and joins the stack as
a fully functioning member.
The auto-upgrade process affects only switches in version-mismatch mode. It does not affect existing
stack members.
Related Commands Command
show boot
show version
Catalyst 3750 Switch Command Reference
2-50
boot auto-copy-sw
no boot auto-copy-sw
Modification
This command was introduced.
Description
Displays the settings of the boot environment variables.
Displays version information for the hardware and firmware.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07