Example For Configuring On-Demand Single-Ended Frame Loss Measurement On A Vpls Network - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
9.10.8 Example for Configuring On-Demand Single-Ended Frame
Loss Measurement on a VPLS Network
This section provides an example showing how to configure on-demand single-end frame loss
measurement on a PW in VPLS networking.
Networking Requirements
To ensure the reliability and stability of links between a user network and an operator network
and improve the operator's capability in monitoring links, Y.1731 must be configured on the
user network or the operator network.
This example shows how to configure on-demand single-ended frame loss measurement on a
PW in VPLS networking.
Figure 9-23 Networking diagram for configuring single-ended frame loss measurement on a
VPLS network
Configuration Roadmap
The configuration roadmap is as follows:
l
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Configure on-demand single-ended frame loss measurement on a PW between PEs.
1.
Issue 02 (2011-09-10)
PE1
GE1/0/2
GE1/0/1
GE1/0/1
CE1
User
Network
Configure on-demand single-ended frame loss measurement on a PW between PEs.
VSI name
MD names and MA names of PE1 and PE2, and MA names of CE1 and PE1
Configure a VPLS connection.
Configure a VPLS connection between PE1 and PE2. The detailed configurations are not
provided here. For details, see the chapter "VPLS Configuration" in the HUAWEI
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/2
VPLS
GE1/0/1
GE1/0/1
CE2
9 Y.1731 Configuration
PE2
User
Network
630