Huawei NetEngine80E Configuration Manual - Reliability page 82

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
2.
Step 4 Configure PWs.
# Configure PE1.
[PE1] mpls l2vpn
[PE1-l2vpn] quit
[PE1] pw-template pwt
[PE1-pw-template-pwt] control-word
[PE1-pw-template-pwt] quit
[PE1] interface atm 1/0/0
[PE1-Atm1/0/0] undo shutdown
[PE1-Atm1/0/0] quit
Issue 02 (2011-09-10)
[PE2-Atm1/0/1] undo shutdown
[PE2-Atm1/0/1] aps group 1
[PE2-Atm1/0/1] aps working 5.5.5.5 4.4.4.4
[PE2-Atm1/0/1] aps timers 1 180
[PE2-Atm1/0/1] quit
# Configure PE3.
[PE3] interface atm 1/0/2
[PE3-Atm1/0/2] undo shutdown
[PE3-Atm1/0/2] aps group 1
[PE3-Atm1/0/2] aps protect 4.4.4.4 5.5.5.5
[PE3-Atm1/0/2] aps mode one2one bidirection
[PE3-Atm1/0/2] aps revert 5
[PE3-Atm1/0/2] aps timers 1 180
[PE3-Atm1/0/2] quit
# Configure CE2.
<HUAWEI> system-view
[HUAWEI] sysname CE2
[CE2] interface atm 2/0/1
[CE2-Atm2/0/1] aps group 1
[CE2-Atm2/0/1] aps working
[CE2-Atm2/0/1] quit
[CE2] interface atm 2/0/2
[CE2-Atm2/0/2] aps group 1
[CE2-Atm2/0/2] aps protect
[CE2-Atm2/0/2] aps mode one2one bidirection
[CE2-Atm2/0/2] aps revert 5
[CE2-Atm2/0/2] quit
Create an ATM-Trunk on PE2, PE3, and CE2 and add interfaces to the ATM-Trunk.
# Configure PE2.
[PE2] interface atm-trunk 1
[PE2-Atm-Trunk1] quit
[PE2] interface atm 1/0/1
[PE2-Atm1/0/1] atm-trunk 1
# Configure PE3.
[PE3] interface atm-trunk 1
[PE3-Atm-Trunk1] quit
[PE3] interface atm 1/0/2
[PE3-Atm1/0/2] atm-trunk 1
# Configure CE2.
[CE2] interface atm-trunk 1
[CE2-Atm-Trunk1] quit
[CE2] interface atm 2/0/1
[CE2-Atm2/0/1] atm-trunk 1
[CE2-Atm2/0/1] quit
[CE2] interface atm 2/0/2
[CE2-Atm2/0/2] atm-trunk 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 APS Configuration
65