Huawei NetEngine80E Configuration Manual - Reliability page 351

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
1.
2.
3.
4.
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure the interface mode as user termination.
# Configure Router A.
[RouterA] interface gigabitethernet 2/0/0
[RouterA-GigabitEthernet2/0/0] undo shutdown
[RouterA-GigabitEthernet2/0/0] mode user-termination
[RouterA-GigabitEthernet2/0/0] quit
# Configure Router B.
[RouterB] interface gigabitethernet 2/0/0
[RouterB-GigabitEthernet2/0/0] undo shutdown
[RouterB-GigabitEthernet2/0/0] mode user-termination
[RouterB-GigabitEthernet2/0/0] quit
Step 2 Configure an IGP to ensure connectivity between devices.
Assign IP addresses to interfaces as shown in
Router B, and Router C. OSPF is adopted in this example.
# Configure Router A.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] interface gigabitethernet 1/0/0
[RouterA-GigabitEthernet1/0/0] undo shutdown
[RouterA-GigabitEthernet1/0/0] ip address 192.168.2.1 24
[RouterA-GigabitEthernet1/0/0] quit
[RouterA] interface gigabitethernet 2/0/0.1
[RouterA-GigabitEthernet2/0/0.1] undo shutdown
[RouterA-GigabitEthernet2/0/0.1] ip address 100.1.1.1 24
[RouterA-GigabitEthernet2/0/0.1] quit
[RouterA] ospf 1
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 192.168.2.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] network 100.1.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
# Configure Router B.
Issue 02 (2011-09-10)
Configure interface modes on Router A and Router B as user termination.
Configure an IGP to ensure connectivity between Router A, Router B, and Router C.
Configure the Layer 2 forwarding function on the switch.
Configure sub-interfaces for dot1q VLAN tag termination on Router A and Router B.
Configure a BFD session on Router A and Router B to detect the link between Router A
and Router B.
Configure VRRP backup group 1 on GE 2/0/0.1 of Router A and GE 2/0/0.1 of Router B.
Router A functions as a master device and Router B functions as a backup device.
Name of the BFD session
ID and virtual IP address of the VRRP backup group
Tag value of sub-interfaces for dot1q termination
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-16. Configure an IGP on Router A,
5 BFD Configuration
334